|
* Part Number: 60-595-062 |
|
* Description: StyleView VL Enclosure (white and aluminum) |
|
* Includes wall plate, mounting template, enclosure, vertical lift, slide-out keyboard tray, wrist rest, mouse pouch, scanner holder, internal cable management, batteries, monitor mounting hardware, wall mounting hardware, keys |
|
* Easy 4-step installation: 1. Attach wall plate using template; 2. Hang enclosure; 3. Install computer; 4. Set keyless security code |
|
* Listed weight capacity represents total load on Vertical Lift engine, including the monitor and contents of keyboard tray, mouse pouch and scanner holder. Maximum load capacity: monitor pivot = 18 lbs (8.2 kg); CPU compartment = 20 lbs ( 9.1 kg); door/worksurface = 50 lbs (22.6 kg) |
|
† Monitor pans left/right ±5° (based on typical 17" monitor; will vary with monitor size) |
|
* Nine inches (229 mm) of vertical adjustment ergonomically accommodates user heights ranging from the 5% female height to the average male height |
|
* Slide-out mouse tray includes built-in pad surface |
|
* Negative-tilt keyboard tray is adjustable 0° to -10°; folds up flat when stored |
|
* Keyboard tray pans left/right up to 120° |
|
* Integrated mouse and scanner holders |
|
* Cable access openings allow cables to pass through top and bottom of enclosure |
|
* CPU compartment is top-vented for maximum CPU heat dissipation |
|
* Open-back design allows wall outlets and other ports to be contained within boundary of enclosure |
|
* Accommodates most small form factor and ultra small form factor CPUs |
|
* Maximum CPU physical dimensions: 13.75" W x 12.75" H x 3.75" D (34.9 x 32.4 x 9.5 cm) |
|
* Maximum monitor physical dimensions: 20.7" W x 14.7" H x 2.75" D (52.6 x 37.3 x 7.0 cm) |
|
* Mounting Standards: VESA FDMI, MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm) |
|
* VESA hole pattern should be on center on back of monitor |
|
* Plastic/polycarbonate components are compliant with the surface flame spread and smoke development requirements from the NFPA 101 Life Safety Code interior wall finish requirements |
|
* Actual Product Dimensions: 27.2" W x 60.6 H x 6.75" D (closed) or 20.6" D (open)
(69 H x 154 H x 17 D or 53 D cm) |
|
* Shipping Dimensions: 65" x 31" x 11.5" (1651 x 787 x 292 mm) |
|
* Shipping Weight: 97 lbs (44.1 kg) |
|
* Warranty: Five (5) years; One (1)-year warranty on all electronic components (excludes AA batteries) |
Ergotron, Inc.总部位于明尼苏达州， 由Harry C. Sweere于1982年成立。Ergotron的名字来源于Ergonomics（人体工程学）和Electronics（电子学）。顾名思义，Ergotron的宗旨是改善人与计算机、显示器、电视机、大型显示器及各种视频显示器之间的界面。Ergotron的特色是以卓越价值提供创新的优质产品
20多年来，Ergotron的产品一直在提升人与数字显示器之间的界面。Ergotron的数字显示器安装解决方案包括壁挂式和台式安装支臂、台式支架、移动推车、落地支架、转轴和垂直升降支架。引进专利CF升降转轴活动技术后,Ergotron产品让用户可以用更小的力量就可以进行更多的活动。每件Ergotron产品均用于在当今的计算机工作和娱乐环境中增强视觉体验、降低疲劳并提高工作效率。 
